BES Embroidery Lettering 3와 ScanNCut으로 아플리케 자르기 완전 가이드

· EmbroideryHoop
BES Embroidery Lettering 3와 ScanNCut으로 아플리케 자르기 완전 가이드
BES Embroidery Lettering 3의 ScanNCut 연동 기능으로 아플리케를 빠르고 정확하게 자르는 법을 단계별로 정리했습니다. 소프트웨어에서 호프 설정과 내장 아플리케 선택, ScanNCut용 아트워크 변환, 인쇄 또는 PNG 내보내기, ScanNCut Canvas에서 트레이스·FCM 다운로드, 기기에서 스캔·배치·미러·1mm 확대, 블레이드·압력 세팅과 커팅까지 전 과정을 한 번에 익히세요.

교육 목적의 해설만을 제공합니다. 이 페이지는 원 저작물에 대한 학습용 노트이자 해설입니다. 모든 권리는 원 저작자에게 있으며, 재업로드·재배포는 허용되지 않습니다.

원본 영상은 제작자의 채널에서 시청해 주세요. 더 많은 튜토리얼을 위해 구독으로 응원해 주시면, 한 번의 클릭이 더 명확한 단계별 데모, 더 나은 카메라 앵글, 실제 테스트 제작에 도움이 됩니다. 아래 «구독» 버튼을 눌러 응원해 주세요.

당신이 원 저작자이고 이 요약의 내용 수정·출처 추가·일부 삭제를 원하신다면, 사이트의 문의 양식을 통해 연락해 주세요. 신속히 답변드리겠습니다.

Table of Contents
  1. BES Embroidery Lettering 3와 ScanNCut 통합 소개
  2. BES 소프트웨어에서 아플리케 디자인 준비
  3. ScanNCut용 변환·내보내기
  4. ScanNCut Canvas로 디지털 준비(선택)
  5. ScanNCut으로 아플리케 커팅
  6. 성공적인 커팅을 위한 팁
  7. 간단 체크
  8. 문제 해결
  9. 댓글에서
  10. 마무리 및 다음 단계

영상 보기: Using BES Embroidery Lettering 3 with ScanNCut — 이 글은 위 영상을 바탕으로 제작되었습니다. 플레이어는 페이지 상단에서 자동으로 표시됩니다.

아플리케를 예쁘게 오려 붙이고 싶은데, 원단이 들뜨거나 모양이 들쭉날쭉해 애를 먹으셨나요? BES Embroidery Lettering 3와 ScanNCut의 궁합을 알게 되면 얘기가 달라집니다. 소프트웨어에서 선 준비, 기기에서 정교 커팅까지—깔끔한 엣지를 위한 최소한의 단계만 밟아보죠. brother 자수 기계

무엇을 배울까요

  • BES에서 호프 선택과 내장 아플리케 디자인 삽입, 중앙 정렬
  • ScanNCut 버튼으로 아트워크 변환 후 인쇄 또는 PNG 내보내기 선택
  • ScanNCut Canvas에서 이미지 트레이싱으로 FCM 만들기와 USB 저장
  • 기기에서 스캔·배치·미러·1mm 확대, 블레이드/압력 설정, 커팅·제거
  • 실전 체크리스트, 흔한 실수 방지 팁

BES Embroidery Lettering 3와 ScanNCut 통합 소개 BES Embroidery Lettering 3에는 ScanNCut 연동 버튼이 추가되어, 자수용 아플리케 배치선을 커팅 가능한 실루엣 아트워크로 바꿔줍니다. 이로써 인쇄 템플릿을 만들어 스캔하거나 PNG로 내보내 ScanNCut Canvas에서 트레이스해 FCM으로 전송하는 두 가지 경로가 열립니다.

Screenshot of BES Embroidery Lettering 3 software interface, showing the main window and a menu with 'ScanNCut' feature highlighted.
The software interface for BES Embroidery Lettering 3 is shown, highlighting the new ScanNCut feature within its options. This indicates the primary tool for design integration.
  • 핵심 흐름 요약

1) BES에서 디자인 선택·배치 → ScanNCut 버튼으로 아트워크 변환 2a) 바로 인쇄해 기기에서 "Scan to Cut Data"로 인식, 저장 후 커팅 2b) PNG로 내보내 ScanNCut Canvas에서 트레이스 → FCM을 USB에 저장 → 기기에서 불러와 커팅

프로 팁

  • 둘 중 어떤 경로든, 기기에서 커팅 전 원단 배치를 스캔해 실제 위치에 맞춰 도안을 옮기면 실패 확률이 크게 줄어듭니다. brother 자수틀

BES 소프트웨어에서 아플리케 디자인 준비 무대는 BES Embroidery Lettering 3. 먼저 작업 공간을 확정합니다.

무대 세팅: 호프와 캔버스 정렬 - 호프 드롭다운에서 Select Hoop → 100x100mm 선택. 이 크기를 기준으로 디자인이 들어오는지 확인합니다.

Screenshot showing hoop selection menu in BES Embroidery Lettering 3 with '100mm x 100mm' selected.
A 100mm x 100mm hoop is selected from the hoop selection menu within the software. This step sets the working area for the applique design.

- 내장 아플리케 추가: Add Design → Add Appliqué Design을 클릭하고, 라이브러리에서 원하는 도형(영상에서는 플라워)을 골라 캔버스에 배치합니다.

Screenshot of 'Add Design' menu with 'Add Appliqué Design' highlighted.
The 'Add Design' menu is open, with 'Add Appliqué Design' highlighted, preparing to insert a pre-designed applique. This action brings up the library of built-in applique shapes.

- Arrange → Center로 중앙 정렬하면 호프 안에 꼭 맞는지 즉시 판단할 수 있습니다.

Screenshot of the selected flower applique design placed on the virtual hoop in BES Embroidery Lettering 3.
A chosen flower applique design is displayed on the virtual hoop in the BES software, showing its initial placement. This is the starting point for design manipulation.

주의

  • 영상에서는 100x100mm를 사용합니다. 다른 호프를 쓸 경우에도 같은 로직으로 진행하되, 호프 경계 밖으로 나가지 않도록 중앙 정렬로 확인하세요. brother 자수틀 4x4

ScanNCut용 변환·내보내기 아플리케 디자인을 커팅 가능한 실루엣으로 바꾸는 단계입니다.

아트워크로 변환하기 - 디자인 선택을 해제한 뒤 Tools 탭의 ScanNCut 버튼을 누르면, 자수 배치선이 단색 실루엣 아트워크로 변환됩니다.

Screenshot of the flower applique transformed into a solid purple artwork in BES Embroidery Lettering 3.
The applique design has been transformed into a solid purple artwork after clicking the ScanNCut button, ready to be processed as a cut file. This shows the visual change from embroidery to cut-ready artwork.

- 복수 조각(예: 꽃잎, 중심 원)이 합쳐져 있다면, 클릭 후 드래그로 각 조각을 분리해 독립적으로 다룰 수 있게 합니다.

Screenshot showing the separated flower and center circle applique pieces in BES Embroidery Lettering 3.
The flower applique is split into two distinct pieces, allowing for individual manipulation of the outer petals and the center circle. This enables separate cutting of different fabric colors or textures.

인쇄 vs. PNG 내보내기: 언제 무엇을? - 인쇄(캔버스 생략 경로): B 메뉴 → Print → Print Preview → 설정에서 Print Color Analysis와 Show Crosshair 체크 해제 → 프린트. 흑백 프린터라면 조각 색을 블랙으로 바꿔 대비를 높이면 스캔 인식이 선명합니다.

Screenshot of the print preview in BES Embroidery Lettering 3 showing only the flower artwork without crosshairs.
The print preview displays only the flower artwork, with crosshairs and color analysis removed, ready for printing. This clean view is ideal for creating a physical template.
Screenshot of the flower applique pieces changed to solid black in BES Embroidery Lettering 3.
The applique pieces are shown in solid black, suitable for printing on a black and white printer for a clear cutting template. This ensures high contrast for scanning.

- PNG 내보내기(Canvas 경로): B 메뉴 → Export Image → PNG 파일 형식 선택 → 파일명 지정 후 저장. 기본값으로 OK. 이렇게 만든 PNG는 ScanNCut Canvas에서 트레이스할 준비가 됩니다.

Screenshot of the 'Save As' dialog box in BES Embroidery Lettering 3, selecting PNG file type.
The 'Save As' dialog box is open, with 'Png File (*.png)' selected as the file type, indicating the process of exporting the design for digital use with ScanNCut Canvas. This saves the image for later import.

프로 팁

  • 인쇄 템플릿 경로는 컴퓨터 없이도 기기 스캔만으로 커팅까지 바로 이어갈 수 있어 간편합니다. 작업 후반에 배치만 다시 확인하세요. brother 자석 자수틀

ScanNCut Canvas로 디지털 준비(선택) 웹 기반 ScanNCut Canvas에서 PNG를 트레이스해 FCM(기기용 파일)으로 변환합니다.

트레이스와 FCM 내보내기 - Canvas 로그인 → New → Image Tracing Mode → PNG 선택 후 Open → Preview에서 파란 윤곽선이 실루엣을 정확히 둘렀는지 확인 → OK.

Screenshot of the ScanNCut Canvas interface showing 'My Projects' and a 'New' button.
The 'My Projects' screen in ScanNCut Canvas is displayed, with the 'New' button prominent to start a fresh design. This is the entry point for working with designs online.
Screenshot of the Image Tracing dialog in ScanNCut Canvas with the black flower design loaded.
The Image Tracing dialog shows the black flower design loaded, with blue lines indicating the traced outlines, ready for conversion to a cut file. This confirms the image is ready for tracing.

- 프로젝트명을 지정하고 Download → Save Link As로 USB에 저장합니다. 안전하게 하드웨어 제거 후 기기로 이동합니다.

Screenshot of 'Save As' dialog box, selecting a removable disk for saving the FCM file.
The 'Save As' dialog box is shown, with 'Removable Disk (E:)' selected as the destination for the FCM file, confirming the file is being saved to a USB stick. This prepares the file for transfer to the ScanNCut machine.

주의

  • 영상에서는 BES에서 직접 .fcm로 내보내는 과정은 다루지 않습니다. PNG → Canvas 트레이스 → FCM 다운로드 또는 인쇄물 스캔 경로를 사용하세요. brother 재봉·자수 겸용 기계

ScanNCut으로 아플리케 커팅 스튜디오(작업실)에서 ScanNCut을 작동하는 단계입니다. 인쇄 템플릿을 스캔해 도안을 저장하는 방법과, USB의 FCM을 불러오는 방법 두 가지가 모두 소개됩니다.

방법 A: 인쇄 템플릿 스캔 후 저장 - 인쇄 템플릿을 커팅 매트에 부착하고 Load → Scan → Scan to Cut Data → Start. 기기가 이미지를 인식하면 바깥 윤곽을 선택하고 화살표로 크롭해 저장합니다. 이후 Home으로 돌아가 매트를 배출합니다.

Printed black flower template on a ScanNCut cutting mat.
A printed black flower template is placed on the ScanNCut cutting mat, ready to be loaded into the machine for scanning. This physical template guides the machine's initial scan.
User's finger adjusting the crop box around the scanned flower template on the ScanNCut screen.
A finger adjusts the cropping box around the scanned flower template on the ScanNCut machine's touchscreen. This ensures only the desired artwork is captured from the template.

방법 B: USB에서 패턴 불러오기

  • Pattern → Saved Data → USB 또는 Machine에서 저장한 FCM 파일(Flower)을 선택해 호출합니다. 이때 마지막에 저장한 파일은 리스트의 끝쪽 페이지에 있습니다.

원단 배치와 도안 정렬 - 접착 시트(High tack fabric support 등)로 준비한 원단을 커팅 매트에 붙이고 로드합니다. 원단이 매트를 꽉 채우지 않으면, 먼저 스캔해 원단 위치를 화면에서 확인한 뒤 도안을 그 위로 옮깁니다.

Two pieces of fabric with different colors placed on the cutting mat, ready to be loaded into the ScanNCut.
Two pieces of fabric, one yellow and one pink, are prepped with adhesive support sheets on the cutting mat, ready for scanning. This shows the material prepared for cutting different parts of the applique.

정확 커팅을 위한 화면 편집 - Edit(상단) → 각 조각을 원단 위로 이동. Modify에서 Mirror(원단을 뒤집어 올렸다면 필수) 후 크기를 1mm 키웁니다. 이는 이후 자수 새틴 스티치가 원단 가장자리를 충분히 덮도록 하기 위함입니다. 모든 조각에 반복 적용하세요.

Close up of ScanNCut screen showing a finger selecting the mirror and size adjustment for the applique piece.
A stylus is used on the ScanNCut screen to select the mirror function and increase the size of an applique piece by 1mm. This adjustment ensures the fabric will be fully covered by the embroidery satin stitch.

프로 팁

  • 단위가 인치라면 Settings에서 mm로 변환해 1mm 확대를 정확히 적용하세요. brother magnetic 프레임

성공적인 커팅을 위한 팁

  • 블레이드/압력: 영상에서는 블레이드 깊이 약 4.25, 압력 2를 예로 보여줍니다. 원단과 접착시트 조합마다 다를 수 있으니, 본 작업 전에 스크랩으로 테스트 컷을 권장합니다.

- 커팅: OK → Cut → Start로 실행. 완료 후 Eject로 매트를 배출합니다.

A hand peeling off the cut flower applique pieces from the cutting mat.
A hand carefully peels the newly cut flower applique pieces from the cutting mat. The pieces, one yellow flower and one pink circle, are now ready for the embroidery machine.
  • 분리: 매트에서 원단을 떼어내면 잘린 아플리케 조각만 남습니다. 얇거나 늘어짐이 있는 원단은 매트를 뒤로 말아 떼듯이 분리하면 찢김을 줄일 수 있습니다.

주의

  • 미러를 잊으면 뒤집힌 원단 배치에서 도안 방향이 반대로 나옵니다. 커팅 직전 Modify에서 꼭 확인하세요. brother 4x4 자수틀

간단 체크

  • BES에서 100x100mm 호프 설정을 했나요?
  • ScanNCut 버튼으로 단색 실루엣 아트워크로 변환했나요?
  • 인쇄라면 교차선/컬러 분석 끄기, PNG라면 Canvas에서 파란 윤곽 검토했나요?
  • 기기에서 원단 스캔 후 도안 위치를 실제 원단 위로 이동했나요?
  • 원단을 뒤집어 올린 경우, Mirror와 1mm 확대를 적용했나요?
  • 블레이드 깊이·압력을 테스트 컷으로 점검했나요?

문제 해결

  • 인식 윤곽이 울퉁불퉁해요: 인쇄 템플릿을 진한 단색(블랙)으로 출력해 대비를 높이세요. PNG 경로라면 Canvas Preview에서 윤곽이 외곽선을 정확히 따라가는지 재확인합니다.
  • 원단이 살짝 덜 덮여요: 1mm 확대를 적용했는지 확인하고, 필요 시 조각별로 위치를 미세 조정합니다.
  • 커팅이 들쭉날쭉해요: 블레이드가 너무 얕거나 압력이 낮을 수 있습니다. 테스트 컷으로 값을 조금씩 올려 최적점을 찾으세요.
  • 매트에서 떼다 찢겨요: 매트를 뒤로 말아 떼어내듯이 분리하고, 필요 시 위딩 툴을 보조로 사용하세요. brother prs100 자수틀

댓글에서

  • “왜 .fcm으로 바로 내보내지 않나요?”라는 질문에 대해, 영상 흐름은 PNG → Canvas 트레이스 → FCM 다운로드 또는 인쇄물 스캔 경로를 사용합니다. BES에서 직접 .fcm 내보내기는 영상에서 다루지 않습니다.
  • “업데이트/업그레이드인가요, Canvas 추가인가요?”라는 질문에 대해, 한 시청자는 “ScanNCutCanvas의 추가 구매 항목”이라고 답했습니다. 다만 영상 본문에는 관련 안내가 없습니다.
  • “고마워요, 이제 알겠어요.”처럼 핵심 흐름을 따라 해 보니 이해됐다는 피드백도 있었습니다. brother 자석 프레임

마무리 및 다음 단계 이번 과정의 포인트는 두 가지입니다. 첫째, BES에서 정확한 크기와 중앙 정렬로 시작해 ScanNCut용 실루엣을 만드는 것. 둘째, 기기에서 실제 원단을 스캔하고 미러·1mm 확대까지 마쳐 자수 새틴 스티치로 엣지를 깨끗하게 감싸는 것입니다. 익숙해지면 인쇄 경로든 Canvas 경로든 원하는 방식으로 빠르게 반복 제작할 수 있습니다. brother pe800 자석 자수틀

주의(요약)

  • 영상에서는 특정 소재·모델별 권장 세팅을 포괄적으로 제시하지 않습니다. 블레이드/압력 값은 원단·접착 조합에 따라 달라질 수 있으므로, 항상 테스트 컷으로 안전하게 값을 확정하세요. brother 자석 자수틀 sizes